Array
(
[id] => 1656
[form_id] => 2
[post_id] =>
[date_created] => 2024-08-31 18:56:22
[date_updated] => 2024-08-31 18:56:22
[is_starred] => 0
[is_read] => 1
[ip] => 213.29.35.188
[source_url] => https://makerfaire.cz/prihlaska/
[user_agent] => Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/128.0.0.0 Safari/537.36
[currency] => CZK
[payment_status] =>
[payment_date] =>
[payment_amount] =>
[payment_method] =>
[transaction_id] =>
[is_fulfilled] =>
[created_by] => 96
[transaction_type] =>
[status] => active
[421.5] => mboleslav
[480.1] => 2024
[151] => Bitbeam
[422.1] => Stánek/výstava (poskytneme vám stoly a židle)
[439.2] => Ne
[397] => Chci získat publikum / uživatele kteří se do stavebnice zapojí, kteří jej budou používat.
[16] => Tištěná stavebnice, dříve vyřezávaná ze dřeva. Základním spojovacím materiálem je šroub M4 nebo plastový kolíček. Stavebnice je aktivně vyvíjena od roku 2011 a obsahuje více než 300 různých dílků. Díky své otevřené licenci a dostupnosti 3D modelů, stejně jako zdrojových souborů pro program OpenSCAD je možné si stavebnici doplnit o své vlastní dílky.
[434] => Ne
[435] => Ne
[481] => Ne
[22] => https://makerfaire.cz/wp-content/uploads/gravity_forms/2-dd81d1c13c57b44cf3af75810b252e64/2024/08/20240830_192754.jpg
[27] => https://bitbeam.cc/
[383] => 4
[60] => Prostor nestandardní velikosti
[344] => 450
[345] => 200
[400] => 3
[401] => 4
[64] => Fakticky potřebuji jen velkou vystavovací plochu, cca 3 stoly jsou tak akorát, když budou 4 využiji je.
[77] => Bylo by příjemné mít přístup k wifi
[74] => Jen standardní vybavení:
- 3D tiskárna - 240W
- počítač - 60W
- nabíječky 40W
[83] => Ne
[96.3] => Ondřej
[96.6] => Tůma
[98] => mcbig@zeropage.cz
[99] => +420737869401
[101.3] => Praha 3
[101.5] => 13000
[105] => Jeden maker
[294.1] => Stejný jako primární kontakt
[160.3] => Ondřej
[160.6] => Tůma
[161] => mcbig@zeropage.cz
[192] => +420737869401
[209] => https://zeropage.cz/
[217] => https://makerfaire.cz/wp-content/uploads/gravity_forms/2-dd81d1c13c57b44cf3af75810b252e64/2024/08/ja_2022.jpeg
[234] => Uživatel, administrátor a programátor SW pro platformu Linux a BSD. Programátor v jazycích Python a C++ pro platformy i386, AVR a ARM. 3D Tiskař a fanoušek. Prezentovanou stavebnici používá i ve školním kroužku Robotiky, programování a 3D tisku pro děti ze základní školy.
[310] => 18 - 50
[320] => robotika
[321.1] => 3d-tisk
[321.11] => vzdelavani
[321.12] => elektricka-vozitka
[321.14] => robotika
[321.18] => zabava-a-hry
[321.23] => deti-a-rodina
[321.28] => open-source
[287] => K projektu jsem se přidal, a zaujal mě koncept, kdy jako tiskař mohu rozšiřovat konstrukční stavebnici do takřka neomezených směrů.
[117.1] => Četl jsem a souhlasím se zpracováním osobních údajů
[303] => Proposed
[is_approved] => 1
[4] =>
[421.1] =>
[421.2] =>
[421.3] =>
[421.4] =>
[421.6] =>
[421.7] =>
[421.8] =>
[421.9] =>
[421.11] =>
[421.12] =>
[480.2] =>
[478] =>
[422.2] =>
[422.3] =>
[422.4] =>
[422.5] =>
[439.1] =>
[444] =>
[443] =>
[452] =>
[457] =>
[455] =>
[458] =>
[456] =>
[459] =>
[454] =>
[460] =>
[462] =>
[463] =>
[464] =>
[465] =>
[466] =>
[467] =>
[453] =>
[468] =>
[470] =>
[471] =>
[472] =>
[473] =>
[474] =>
[475] =>
[447] =>
[449] =>
[448] =>
[450] =>
[432.1] =>
[432.2] =>
[432.3] =>
[415] =>
[433] =>
[426] =>
[424] =>
[428] =>
[429] =>
[430] =>
[431] =>
[416] =>
[425] =>
[427] =>
[437] =>
[438] =>
[391] =>
[392] =>
[393] =>
[394] =>
[396] =>
[395] =>
[382] =>
[32] =>
[139] =>
[390] =>
[82] =>
[85] =>
[389] =>
[94] =>
[95] =>
[96.2] =>
[96.4] =>
[96.8] =>
[101.1] =>
[101.2] =>
[101.4] =>
[101.6] =>
[104] =>
[248] =>
[160.2] =>
[160.4] =>
[160.8] =>
[273.1] =>
[249] =>
[158.2] =>
[158.3] =>
[158.4] =>
[158.6] =>
[158.8] =>
[162] =>
[208] =>
[216] =>
[224] =>
[258] =>
[311] =>
[274.1] =>
[250] =>
[155.2] =>
[155.3] =>
[155.4] =>
[155.6] =>
[155.8] =>
[167] =>
[207] =>
[215] =>
[223] =>
[259] =>
[312] =>
[278.1] =>
[251] =>
[156.2] =>
[156.3] =>
[156.4] =>
[156.6] =>
[156.8] =>
[166] =>
[206] =>
[214] =>
[222] =>
[260] =>
[313] =>
[279.1] =>
[252] =>
[157.2] =>
[157.3] =>
[157.4] =>
[157.6] =>
[157.8] =>
[165] =>
[205] =>
[213] =>
[220] =>
[261] =>
[314] =>
[280.1] =>
[241] =>
[159.2] =>
[159.3] =>
[159.4] =>
[159.6] =>
[159.8] =>
[164] =>
[204] =>
[211] =>
[221] =>
[262] =>
[270] =>
[315] =>
[281.1] =>
[242] =>
[154.2] =>
[154.3] =>
[154.4] =>
[154.6] =>
[154.8] =>
[163] =>
[203] =>
[212] =>
[219] =>
[263] =>
[316] =>
[272] =>
[109] =>
[111] =>
[110] =>
[112] =>
[138] =>
[119] =>
[321.2] =>
[321.3] =>
[321.4] =>
[321.5] =>
[321.6] =>
[321.7] =>
[321.8] =>
[321.9] =>
[321.13] =>
[321.15] =>
[321.16] =>
[321.17] =>
[321.19] =>
[321.21] =>
[321.22] =>
[321.24] =>
[321.25] =>
[321.26] =>
[321.27] =>
[321.29] =>
[321.31] =>
[321.32] =>
[321.33] =>
[321.34] =>
[321.35] =>
[321.36] =>
[321.37] =>
[321.38] =>
[134] =>
[140] =>
[135] =>
[136] =>
[150] =>
[304.1] =>
[304.2] =>
[304.3] =>
[325] =>
[326] =>
[workflow_current_status_timestamp] =>
)
Bitbeam
RobotikaTištěná stavebnice, dříve vyřezávaná ze dřeva. Základním spojovacím materiálem je šroub M4 nebo plastový kolíček. Stavebnice je aktivně vyvíjena od roku 2011 a obsahuje více než 300 různých dílků. Díky své otevřené licenci a dostupnosti 3D modelů, stejně jako zdrojových souborů pro program OpenSCAD je možné si stavebnici doplnit o své vlastní dílky.
MAKER
Ondřej Tůma
Uživatel, administrátor a programátor SW pro platformu Linux a BSD. Programátor v jazycích Python a C++ pro platformy i386, AVR a ARM. 3D Tiskař a fanoušek. Prezentovanou stavebnici používá i ve školním kroužku Robotiky, programování a 3D tisku pro děti ze základní školy.